Before Operation; Forklift Transport - Trotec Speedy 400 flexx Operation Manual

3 BEFORE OPERATION

You receive your Speedy 400 flexx packed in a wooden crate, which contains the
laser and additional accessories.
A suitable fork-lift is required to unload from the courier vehicle and lift the machine
off its pallet.
A powered screwdriver with cross-head bit is recommended for dismantling the
wooden crate.
If possible keep the packaging in case the machine ever needs to be relocated or
shipped for any reason.
3.1

Forklift transport

If possible keep the packaging in case the machine ever needs to be
relocated or shipped for any reason.
Dispose all waste according to the applicable waste disposal law.
8026 | V5.0_EN (11/2015)
Technical changes reserved
Lifting points
Trotec Laser GmbH
The machine may only be lifted
and transported:

Under the guidance of a
nd
2 person, and

At the points identified.
Page 17 of 62