Transport, Packaging And Storage; Safety Notes; Transport And Unloading; Required Tools - Trotec Speedy 360 flexx Operation Manual

Speedy 360
6

Transport, packaging and storage

6.1

Safety notes

WARNING
Risk of injury
There is risk of injury from falling parts during transport, loading and unloading of the
machine.
- Follow the safety instructions.
Observe the safety instructions to avoid damage to the machine from improper handling during
transport:

Always move the machine with utmost care and attention.

Take the machine's center of gravity into account when transporting it (minimize the risk of tipping
over).

Observe the packaging symbols (e.g. transport the machine only in upright position).

Take measures to prevent the machine from slipping sideways.

Transport the machine as carefully as possible in order to prevent damage.

Avoid vibrations.

When transporting the machine overseas, the device must be packaged airtight and protected
against corrosion.

When transporting outdoors, transport only in vehicles with roof or sufficient weather protection.

Protect the machine against transportation damage using straps and inserts, and leave sufficient
gaps to other transported items.

Do not place any other loads or items on the machine or machine components.
6.2

Transport and unloading

Unless otherwise agreed, the machine is delivered in a wooden crate that contains the laser machine
and additional accessories. Transport the machine only in its original packaging.
During transport the transport case can slip, tip or fall over, if not properly secured
6.2.1

Required tools

Type
BA 8032_2.2_EN (05/2016)
Unloading
forklift
Transport
pallet truck
www.troteclaser.com
46 / 90