Inserting The Sweeping Roller - HAKO Scrubmaster B400 R Operating Manual

Maintenance and servicing
5.8.4

Inserting the sweeping roller

Note
• Turn the star-shaped handle for sweeping level adjustment
Fig. 56-2 as far as it will go in the direction “-” (minus). This facili-
tates inserting the sweeping roller.
• Please ensure that the sweeping roller is in the correct installation
position! The teeth point towards the left side of the machine.
1. Slide the new or cleaned sweeping roller with the toothed side Fig. 55-3
into the sweeping housing and onto the driver of the opposite side.
2. Turn the sweeping roller several times to ensure the sweeping roller sits
well on the teeth and the bristles lie optimally in the sweeping housing.
3. Insert the plate with seal Fig. 55-6 and install it with the two black star-
shaped handles with the yellow dots Fig. 55-5.
4. Fit the cover Fig. 55-1 onto the sweeping roller and install it with the yellow
star-shaped handle Fig. 55-2.
5. Adjust the sweeping level, see section 5.8.5.
140
Scrubmaster B400 R (7190)