Maintenance And Servicing - HAKO Scrubmaster B400 R Operating Manual

Maintenance and servicing

5 Maintenance and servicing
Warning
• Daily and weekly maintenance work must be performed in
accordance with the maintenance plan by trained operators. For
all other maintenance work, please contact your nearest Hako
service workshop.
• The maintenance work and maintenance intervals specified in the
operating manual and service booklet must be complied with.
• Suitable tools and protective clothing such as protective gloves
and safety shoes must be used during cleaning, repair and
maintenance work.
• Have the machine checked for safe condition by an expert in
accordance with the accident prevention regulations at appro-
priate intervals (we recommend at least once yearly).
• Spare parts must at least comply with the technical requirements
specified by the manufacturer. This is guaranteed by original
spare parts.
• Turn the machine off, remove the key and disconnect the battery
plug when cleaning and maintaining the machine and before
replacing parts.
• Cleaning the machine with a water jet, high-pressure cleaner or
steam jet is not permitted!
• Only put the machine into service when all the protective devices
are attached and in protection position.
• Do not perform any welding, drilling, sawing or grinding work on
parts of the frame. Have damaged parts replaced by a Hako
service workshop.
Attention
• Application of aggressive and corrosive detergents for cleaning
the machine is not allowed.
Note
• After cleaning, let the machine air dry, e.g. over the weekend. To
do this, leave the tank cap open.
• The maintenance work and maintenance intervals specified in the
operating manual must be complied with.
106
Scrubmaster B400 R (7190)