Maintenance Plan - HAKO Scrubmaster B400 R Operating Manual

Maintenance and servicing
5.1

Maintenance plan

Hako system maintenance customer:
Work to be performed by the customer by reference to the servicing and main-
tenance instructions specified in the operating manual.
Daily
• Flex wall tank:
• Empty and clean the waste water area.
• Check and clean the solution drain hose seal.
• Check and clean the waste water drain hose seal.
• Clean the coarse dirt sieve.
• Clean the intake sieve.
• Check the cap seal of the flex wall tank, clean if
necessary.
• Battery:
• Check the battery charge.
• Charge the battery.
• Check the squeegee and clean if necessary.
• Check the suction hose for tight fit, damage and clogging,
replace or clean if necessary.
• Check the rotating brushes/pads for wear and foreign
particles, replace or clean if necessary.
• Water treatment (option)
Clean the filter.
• Pre-sweep suction unit (B400 RM/RH only):
• Clean the plate filter.
• Empty the dirt hopper and clean if necessary.
• Clean the sweeping roller and the sweeping roller
compartment.
• Check the dirt hopper seals and clean if necessary.
• Visually inspect the V-belt of the sweeping roller.
108
Section
5.4.1 / 5.4.2
5.3.4
5.4.5
5.4.3
5.4.4
5.4.6
5.2.1
5.2.2
5.11.1
5.6.2
5.10.2
5.7
5.8.2
Scrubmaster B400 R (7190)