Loading And Transporting - HAKO Scrubmaster B400 R Operating Manual

3.5

Loading and transporting

Attention
• When loading and subsequently transporting the machine to the
work site, the working units must be switched off and in the raised
position. The tank and dirt hopper must be emptied.
• Remove the squeegee before driving on loading ramps.
• Risk of skidding! Drive very carefully and only on dry ramps.
• When loading the machine, reverse it (empty drive) up the ramp
(maximum slope 18 %).
Loading
When loading the machine, observe its weight, see section 4 Technical data
on page 100.
3
3
Fig. 32
1 Main attachment point B400 R/RM/RH
2 Main attachment point support B400 RM/RH
3 Attachment points on the rear of the machine B400 R/RM/RH
Scrubmaster B400 R (7190)
Operation
1
2
1
95