Working Light, Reversing Camera With Monitor And Flashlight (Option) - HAKO Scrubmaster B400 R Operating Manual

The steering column switch is mounted on the steering column and is used to
operate the turn indicators, the dipped headlights, the rear light and the horn.
Information on the function and operation of the steering column switch, see
section 6.11 StVZO on page 164.
2.4.16 Working light, reversing camera with monitor and flashlight
(option)
1
Fig. 19
1 Front working light
2 Rear working light
3 Reversing camera
4 Flashlight
The front working lights Fig. 19-1 are mounted on the frame to the left and
right of the pre-sweep suction unit hood and illuminate the front working area.
The rear working light Fig. 19-2 is mounted on the cap of the flex wall tank
and illuminates the rear working area.
The working lights are switched on and off via the action level on the multi-
function display Fig. 9-3.
A reversing camera Fig. 19-3 may be mounted under the rear working light.
The captured image is displayed on a monitor to the right of the control panel.
The flashlight Fig. 19-4 is mounted on the machine in such a way that it is
clearly visible from all sides. If there is no overhead guard (option), the flash-
light is located on the cap of the water tank. The flashlight is switched on and
off via the multifunction display.
Scrubmaster B400 R (7190)
2 3
Use
4
73