On-Board Dosing System (Option) - HAKO Scrubmaster B400 R Operating Manual

3.4.2

On-board dosing system (option)

Fig. 26
1 Quick coupling
2 Cap with tube
3 Sub-menu Maintenance
4 Menu Fast fill
The on-board dosing system is used for optimum dosing of the detergent.
Attention
• Only use detergents suitable for automatic machines (foam
retarded). We recommend use of our cleaning and care agents
specifically developed for the machines. These products meet the
requirements of the German Detergent and Cleaning Agent Act
(WRMG).
Putting into service
The following points must be run through for putting into service and after
every canister change.
1. Release the quick coupling Fig. 26-1 at the canister lid by pulling the lower
ring of the coupling upwards.
2. Unscrew the lid from the canister and replace the canister.
3. Screw on the lid with integrated tube Fig. 26-2 and fit the quick coupling
with hose.
4. Turn the machine on with the key switch.
5. In the sub-menu Maintenance Fig. 26-3, select the Fast fill menu Fig. 26-4
with the turn-push knob and confirm.
When the program is started, the detergent is conveyed to the brush unit by
means of the dosing pump.
The program finishes automatically.
The on-board dosing system is ready for operation.
Scrubmaster B400 R (7190)
1
3
2
Operation
4
85