Waste Water Tank; Emptying The Waste Water Tank - HAKO Scrubmaster B400 R Operating Manual

5.4

Waste water tank

5.4.1

Emptying the waste water tank

1
Fig. 44
1 Warning symbol Waster water tank
2 Waste water tank drain hose
3 Drain valve closed
Empty and clean the waste water tank Fig. 45-8 as required but at least once
a day. When the warning symbol Waste water tank full Fig. 44-1 appears on
the multifunction display and an acoustic warning signal is output, the suction
function is switched off and the waste water tank should be emptied
immediately.
Environmental danger
Observe applicable laws and local regulations when disposing of
detergents!
1. Drive to a suitable disposal centre.
2. Position the machine, ensuring the drain hose Fig. 44-2 reaches the drain
in the ground.
3. Turn the machine off and remove the key.
4. Remove the drain hose Fig. 44-2 from the holder, open the drain valve and
empty the waste water tank over the drain.
5. Ensure that the drain hose closure is fully closed after draining Fig. 44-3!
6. Stow away the drain hose in the holder again.
Scrubmaster B400 R (7190)
Maintenance and servicing
2
3
125