Side Wiper; Changing The Wiper Rubber - HAKO Scrubmaster B400 R Operating Manual

5. Before turning or replacing the slot and sealing strip, thoroughly clean the
squeegee body!
Installation is in reverse order.
Note
The strips can be of different thickness. The turnbuckles must be
readjusted if necessary Fig. 62-7.
5.12

Side wiper

1
Fig. 63
1 Side wiper
2 Wing nut
3 Tension strap
4 Wiper rubber
5.12.1

Changing the wiper rubber

Check the wiper rubber Fig. 63-4 weekly for wear, turn or replace the rubber if
necessary.
1. Place the machine on a level surface.
2. Turn the machine off and remove the key.
3. If present, unlock the side collision protection Fig. 49-3, raise it slightly and
swivel it to the side.
4. Loosen the wing nut Fig. 63-2.
5. Remove the tension strap Fig. 63-3.
6. Turn the wiper rubber (can be used 4 times) or replace it.
Installation is in reverse order.
Scrubmaster B400 R (7190)
Maintenance and servicing
4 3 2
151