Spray Nozzle - HAKO Scrubmaster B400 R Operating Manual

Attachments/options
6.6

Spray nozzle

6
5
Fig. 66
1 Spray nozzle
2 Water jet type setting
3 Adjusting lever for water dosing
4 Operating handle ON / OFF water supply with locking mechanism
5 Water connection of machine
6 Button Tool operation
The spray nozzle Fig. 66-1 is used to flush the waste water tank.
1. Connect the hose to the lateral water connection of the machine Fig. 66-5.
2. Use the Tool operation button Fig. 66-6 on the control panel to turn the
water supply on and off. The operator must not be sitting on the seat.
Press the button: Spray nozzle water supply ON
Press the button again: Spray nozzle water supply OFF
3. Spray nozzle operation:
4 = Operating handle for switching the water supply with locking
mechanism on and off
3 = Adjusting lever for water dosing
2 = Water jet type setting
156
1
2 3
4
Scrubmaster B400 R (7190)