Apply Network Settings; Ethernet Tool Kit; Device Filter Based On Mac Address - Lightware RAP-B511-EU User Manual

   
7. LW3 Programmers' Reference
7.14.9. Apply Network Settings
Always call the Apply settings function to save the network settings.
Command and Response
ç CALL·/MANAGEMENT/NETWORK:ApplySettings()
æ mO /MANAGEMENT/NETWORK:ApplySettings
Example
ç CALL /MANAGEMENT/NETWORK:ApplySettings()
æ mO /MANAGEMENT/NETWORK:ApplySettings
RAP-B511 series – User's Manual
7.15. Ethernet Tool Kit
DIFFERENCE:

7.15.1. Device Filter Based on MAC Address
You can create a list of network devices based on the MAC address which are allowed controlling the device,
or querying parameters to/from the Lightware
Command and Response
ç
æ
The filter is disabled as default. Set the FilterEnable property to true as shown in the example.
Parameters
<loc>
<MAC_address>
<receive>
<send>
<name>
Example
ç SET /MANAGEMENT/MACFILTER/MACaddress4=(04:D4:C4:4D:01:43;1;1;Tech)
æ pw /MANAGEMENT/MACFILTER/MACaddress4=(04:D4:C4:4D:01:43;1;1;Tech)
ç SET /MANAGEMENT/MACFILTER.FilterEnable=true
æ pw /MANAGEMENT/MACFILTER.FilterEnable=true
New MAC address is saved into the 4th property with name 'Tech', which may query/set parameters from/in
the Lightware device. The FilterEnable property is set to true, thus, the filter is enabled.
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
This feature and below commands are available from FW package v1.1.0b3.
device. #macfilter
SET·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>
pw·/MANAGEMENT/MACFILTER.MACaddress<loc>=<MAC_address>;<receive>;<send>;<name>
Parameter Parameter description Values
Location of the address 1-8
The MAC address of the Unique value Hex format, divided by a colon
device
Enable/disable the false (or 0)
parameter querying option
true (or 1)
Enable/disable the false (or 0)
parameter setting option
true (or 1)
Unique name for the better Any string
identification (optional)
88
#new
Value description
The default values of 1, 2 and 3 ensure that
address resolution and device discovery
continue to work after enabling the MAC
filter
The device is not allowed to query
parameters from the LW device
The device is allowed to query parameters
from the LW device
The device is not allowed to change
parameters in the LW device
The device is allowed to change parameters
in the LW device
Up to 5 ASCII characters (longer names
are truncated)