Mounting Rap-B511-Us Into The Outlet Box - Lightware RAP-B511-EU User Manual

   
3. Installation
3.1.6. Mounting RAP-B511-US into the Outlet Box
Step 1. Pull apart the Front plate from the RAP-B511-US by hand (no special tool needed).
Step 2. Place four screws (marked with yellow) in the holes.
R A
P - B
5 1 1
- U S
F r o
n t p
l a t e
R A
P - B
5 1 1
- U S
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
RAP-B511 series – User's Manual
Step 3. Insert the RAP-B511-US into the Outlet box and position it to get the holes aligned.
Step 4. Fasten the front side of the device to the Outlet box by fitting all the screws.
Step 5. Place back the Front plate to the RAP-B511-US
See more details about the exact sizes of the RAP-B511-US in the
O u
t l e t
b o x
R A
P - B
5 1 1
- U S
R A
P - B
5 1 1
- U S
F r o
n t p
l a t e
Mechanical Drawings
19
section.