Set The Default Intensity Of The High Brightness; Set Background Light Of The Button; Set The Background Light For A Period Of Time - Lightware RAP-B511-EU User Manual

   
7. LW3 Programmers' Reference
7.8.3. Set the Default Intensity of the High Brightness
Command and Response
SET·/MANAGEMENT/UI/LEDS.HighBright=<light_intensity>
ç
pw·/MANAGEMENT/UI/LEDS.HighBright=<light_intensity>
æ
Parameters
Identifier Parameter description
<light_intensity> The default intensity of the background light. 0-5:0 means no bright, 5 is the
Example
ç SET /MANAGEMENT/UI/LEDS.HighBright=3
æ pw /MANAGEMENT/UI/LEDS.HighBright=3
7.8.4. Set Background Light of the Button
Set the TrueFunction
Here the LEDs behaviour can be defined how the when the button is pressed or released. This property takes
into consideration the Set the Button Interaction
according to this setting.
Command and Response
SET·/MANAGEMENT/UI/LEDS/<LED_ID>.TrueFunction=<light_mode>
ç
pw·/MANAGEMENT/UI/LEDS/<LED_ID>.TrueFunction=<light_mode>
æ
Parameters
Identifier Parameter description
<light_mode> Type of the background light.
Example
ç SET /MANAGEMENT/UI/LEDS/LED11.TrueFunction=1
æ pw /MANAGEMENT/UI/LEDS/LED11.TrueFunction=1
Parameter values
maximum brightness.
State. If it is true (<btn_ID>.State=true), the LED will light
Parameter values
0: Off
1: Low brightness
2: High brightness
3: Blinking
4: Slow blinking
5: Sine pulse
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
RAP-B511 series – User's Manual
Set the FalseFunction
Here the LEDs behaviour can be defined, when the button is pressed or released. This property takes into
consideration the Set the Button Interaction
according to this setting.
Command and Response
SET·/MANAGEMENT/UI/LEDS/<LED_ID>.FalseFunction=<light_mode>
ç
pw·/MANAGEMENT/UI/LEDS/<LED_ID>.FalseFunction=<light_mode>
æ
Parameters
Identifier
<light_mode> Type of the background light.
Example
ç SET /MANAGEMENT/UI/LEDS/LED11.FalseFunction=2
æ pw /MANAGEMENT/UI/LEDS/LED11.FalseFunction=2
7.8.5. Set the Background Light for a Period of Time
Command and Response
ç CALL·/MANAGEMENT/UI/LEDS/<led_ID>:<button_func>(<time>)
æ mO·/MANAGEMENT/UI/LEDS/<led_ID>:<button_func>(<time>)
Parameters
Identifier Parameter description
<led_ID> LED identifier
<button_func> Type of the background
lightning.
<time> Duration of time in ms
while the LED lights.
Example
ç CALL /MANAGEMENT/UI/LEDS/LED11:tempFuncOff(100)
æ mO /MANAGEMENT/UI/LEDS/LED11:tempFuncOff
State. If it is false (<btn_ID>.State=false), the LED will light
Parameter description Parameter values
0: Off
1: Low brightness
2: High brightness
3: Blinking
4: Slow blinking
5: Sine pulse
Parameter values
LED1-11
tempFuncOff: No brightness
tempFuncLowBright: Low brightness
tempFuncHighBright: High brightness
tempFuncBlink: Blinking
1-60000
77