Features Of The Device - Lightware RAP-B511-EU User Manual

   
1. Introduction
1.6. Features of the Device
Basic Features
Front panel buttons and rotary knob
Integrated keypad with 11 programmable backlight buttons. Volume rotary knob to control
Lightware devices, TVs or Power Amplifiers volume.
Ethernet Control
Multiple simultaneous TCP/IP connections are available with a simple ASCII-based protocol
for controlling, configuring the device or perform a firmware upgrade.
Built-in Mini Web
w w w
The Miniweb is able to display an adaptive surface of a virtual front panel, advanced web
page displays buttons for Event manager Actions.
Remote Power
The RAP-B511 is PoE-compatible and can be powered locally by the supplied power adaptor,
or remotely via the TPS connection (through the CATx cable) with a compatible power source
equipment, e.g. MMX6x2-HT series matrix switchers and TPS2 matrix boards.
Bi-directional RS-232 Pass-through
RS-232
AV systems can also contain serial port controllers and controlled devices. Serial port pass-
through supports any unit that works with standard RS-232.
RS-232 Recognizer
RS-232
Support recognizing incoming RS-232 messages to integrate with 3rd party devices or
x
Lightware units.
11 0100 1
GPIO Control Port
3 GPIO pins operating at TTL digital signal levels and can be controlled with both LW2 and
LW3 commands.
Infra
Infrared (IR) is a wireless technology used for device communication over short ranges. Third
party control systems may send IR control commands to endpoints turning them on and off
or switching their inputs.
RAP-B511 series – User's Manual
Advanced Control Pack v3

DIFFERENCE:
11 0100 1
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
LDC
The Lightware Device Controller (LDC) application keeps receiving upgrades, adding new
features and tools. The latest edition of LDC has gotten more intuitive, user friendly, smarter
and has a modern user interface. The LDC is available for both Windows and macOS operating
systems.
Built-in Event Manager
The Event Manager tool takes care of all the necessary control in a smaller configuration
by performing predefined actions in response to device status changes. Hence, in a less
complex environment, there is no need to invest in additional control solutions, which makes
the receiver the best choice for numerous applications.
Real-time clock
Real-time clock with network time protocol and automatic daylight saving adjustment for
Event Manager scheduling.
The following features are available from firmware package v1.1.0b3.
Basic IT-security
LWR
These entry-level network security improvements help to prevent unauthorized access to the
Lightware device: cleartext login, TCP port blocking and MAC address filtering.
Batch Commands
A batch of LW3 commands (salvo) can be run by the Lightware device either by a previously
stored macro or by sending a file to the device with the desired commands.
Event Manager +
Triggering a condition, defining variables and checking four conditions for an action – these
features are available by the improved Event Manager.
TCP Recognizer
TCP
Support recognizing the incoming TCP messages to integrate with 3rd party devices like the
x
video conference codec devices.
9
#new