Specifications; Factory Default Settings - Lightware RAP-B511-EU User Manual

   
10. Appendix
10.1. Specifications
General
Compliance ......................................................................................... CE
Electrical safety ...........................................................EN 62368-1:2014
EMC (emission).......................................................IEC/EN 55032:2015
EMC (immunity) ......................................................IEC/EN 55035:2017
RoHS ............................................................................... EN 63000:2018
Warranty .......................................................................................3 years
Operating temperature ............................ 0° to +50°C (+32° to +122°F)
Operating temperature ............................... 0 to +50˚C (+32 to +122˚F)
Operating humidity ..................................10% to 90%, non-condensing
Cooling.........................................................................................Passive
Power
Power supply option......................... .................... Power adaptor / PoE
Power consumption (supplied by local power) .......................... 1.78W
Power consumption (supplied by PoE) ....................................... 1.87W
Heat dissipation (max) .............................................................. 7 BTU/h
Power over Ethernet (PoE) .................. via Ethernet port (IEEE802.3af)
Power adaptor (not supplied)
Supported power source ................................ 100-240 V AC; 50/60 Hz
Supplied power .................................................................. 48V DC, 0.5A
AC power plug ...................... Interchangable (EU, UK, JP/US, AUS/NZ)
DC power plug ............................................... 2-pole Phoenix connector
Enclosure
Rack mountable .................................................................................. No
Enclosure material ................................................................ 1 mm steel
Dimensions in mm (-EU) ................................... 152 W x 58.1 D* x 82 H
Dimensions in inch (-EU) ........................................6 W x 2.3 D* x 3.3 H
Dimensions in mm (-UK) .................................. 140 W x 58.1 D* x 80 H
Dimensions in mm (-UK) .....................................5.6 W x 2.3 D* x 3.2 H
Dimensions in mm (-US)........................... 115.9 W x 58.1 D* x 115.9 H
RAP-B511 series – User's Manual
Dimensions in mm (-US)......................................4.6 W x 2.3 D* x 4.6 H
Weight (-EU) .................................................................................... 412g
Weight (-UK) .................................................................................... 380g
Weight (-US) .................................................................................... 433g
* with the front panel and rotary knob
Control Ethernet
Connector type ..................................................RJ45 female connector
Ethernet data rate .............. 10/100Base-T, full duplex with autodetect
Power over Ethernet (PoE) ............................. PoE in (1x), PoE out (1x)
RS-232
Connector type .............................................. 3-pole Phoenix connector
Baud rates ..........................................between 4800 and 115200 baud
Data bits ......................................................................................... 8 or 9
Parity .......................................................................... None / Odd / Even
Stop bits ...................................................................................1 / 1.5 / 2
Output voltage: Low / High level ...............................3 - 15V / -15V - 3V
Infrared port
Input............................................... ............................ Built-in IR detector
GPIO port
Connector type .............................................. 4-pole Phoenix connector
Number of configurable pins ................................................................3
Port direction................................................................... Input or output
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
10.2. Factory Default Settings
Parameter
Button settings
Button enabled true
Operation mode 0
Interaction state true
EnabLED true
LED function for True state off
LED function for False state off
Button LED lowbright level 2
Button LED highbright level 5
Network settings
IP address 192.168.0.100
Subnet mask 255.255.255.0
Static gateway 192.168.0.1
DHCP Disabled
LW2 port number 10001
LW3 port number 6107
HTTP port number 80
RS-232 settings
Control protocol LW2
Baud rate 57600
Databits 8
Parity No
Stopbits 1
Operation mode Command Injection
Command injection port nr. 8001
Recognizer delimiter 0D0A
Recognizer Timeout 0 (disabled)
Recognizer Active property timeout 50
IR port settings
Command injection status Enabled
Command injection input port nr. 9001
GPIO port settings
Output level / Direction High / Input
115
Setting/Value