Table of Contents
Advertisement
7. LW3 Programmers' Reference
7.6.8. Query the Local Time (RTC)
Command and Response
ç GET·/SYS/MB/RTC.LocalTime
pr·/SYS/MB/RTC.LocalTime=<localtime>
æ
Parameters
<localtime>
Displays the date and the local time.
Example
ç GET /SYS/MB/RTC.LocalTime
æ pr /SYS/MB/RTC.LocalTime=2019-02-14T17:16:14
7.6.9. Query the Local Time (RTC) Elements
TIPS AND TRICKS:
When repetitive scheduled actions are required, these properties should be set as a
condition in the Event Manager.
Command and Response
GET·/SYS/MB/RTC.<RTC_element>
ç
pr·/SYS/MB/RTC.LocalTime=<RTC_element>
æ
Parameters
Identifier
Parameter description
<RTC_element>
Years
Months
Days
Hours
Minutes
Seconds
DaylightSaving
Weekday
Yearday
Scheduler time
Example
ç GET /SYS/MB/RTC.Years
æ pr /SYS/MB/RTC.Years=2019
Parameter example
2019 (four digit number between 2000 and 2099)
12 (max. two digit number between 1 and 12)
7 (max. two digit number between 1 and 31)
9 (max. two digit number between 0 and 24)
54 (max. two digit number between 0 and 59)
11 (max. two digit number between 0 and 59)
true or false
1: Monday; 2: Tuesday; 3: Wednesday; 4: Thursday
5: Friday; 6: Saturday; 7: Sunday
It shows the which day is on the week.
193 (max. two digit number between 1 and 365)
It shows the which day is in the year.
5-18-19 (Weekday-Hours-Minutes)
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
RAP-B511 series – User's Manual
7.7. Button Configuration
General parameters
Identifier
Parameter description
<btn_ID>
Button identifier
7.7.1. Lock the Front Panel Functionality
Command and Response
SET·/MANAGEMENT/UI.ControlLock=<lock_status>
ç
pw·/MANAGEMENT/UI.ControlLock=<lock_status>
æ
Parameters
Identifier
Parameter description
<lock_status>
Example
ç SET /MANAGEMENT/UI.ControlLock=1
æ pw /MANAGEMENT/UI.ControlLock=1
7.7.2. Lock the Buttons Separately
Command and Response
SET·/MANAGEMENT/UI/BUTTONS/<btn_ID>.Enabled=<btn_lock_status>
ç
æ pw·/MANAGEMENT/UI/BUTTONS/<btn_ID>.Enabled=
Parameters
Identifier
Parameter description
<btn_lock_status>
Example
ç SET /MANAGEMENT/UI/BUTTONS/BUTTON1.Enabled=false
æ pw /MANAGEMENT/UI/BUTTONS/BUTTON1.Enabled=false
Parameter values
BUTTON1-11
Parameter values
0: None - All functions of the front panel buttons and the rotary
are enabled.
1: Locked - Locking and unlocking of the front panel buttons and
the rotary are possible with Lightware Device Controller software
or via protocol command.
2: Force locked - The front panel buttons are locked and cannot be
unlocked by button combination, only in LDC (on the
or using the LW3 command.
<btn_lock_status>
Parameter values
true: On buttonpress event, the funcitonality of the
button is enabled.
false: On buttonpress event, the funcitonality of the
button is disabled.
73
Status
tab)
Advertisement
Table of Contents
Troubleshooting
