Query The Ip Address; Change The Ip Address (Static); Query The Subnet Mask; Change The Subnet Mask (Static) - Lightware RAP-B511-EU User Manual

   
7. LW3 Programmers' Reference
7.14.3. Query the IP Address
Command and Response
ç GET·/MANAGEMENT/NETWORK.IpAddress
pr·/MANAGEMENT/NETWORK.IpAddress=<IP_address>
æ
Example
ç GET /MANAGEMENT/NETWORK.IpAddress
æ pr /MANAGEMENT/NETWORK.IpAddress=192.168.0.100
7.14.4. Change the IP Address (Static)
Command and Response
SET·/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
ç
pw·/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
æ
Example
ç SET /MANAGEMENT/NETWORK.StaticIpAddress=192.168.0.85
æ pw /MANAGEMENT/NETWORK.StaticIpAddress=192.168.0.85
ç CALL /MANAGEMENT/NETWORK:ApplySettings()
æ mO /MANAGEMENT/NETWORK:ApplySettings

INFO: The applySettings method will save and apply the new value and results the device to reboot.
7.14.5. Query the Subnet Mask
Command and Response
ç GET·/MANAGEMENT/NETWORK.NetworkMask
pr·/MANAGEMENT/NETWORK.NetworkMask=<netmask>
æ
Example
ç GET /MANAGEMENT/NETWORK.NetworkMask
æ pr /MANAGEMENT/NETWORK.NetworkMask=255.255.255.0
RAP-B511 series – User's Manual
7.14.6. Change the Subnet Mask (Static)
Command and Response
ç
æ
Example
ç SET /MANAGEMENT/NETWORK.StaticNetworkMask=255.255.255.0
æ pw /MANAGEMENT/NETWORK.StaticNetworkMask=255.255.255.0
ç CALL /MANAGEMENT/NETWORK:ApplySettings()
æ mO /MANAGEMENT/NETWORK:ApplySettings
INFO:

7.14.7. Query the Gateway Address
Command and Response
ç GET·/MANAGEMENT/NETWORK.GatewayAddress
æ
Example
ç GET /MANAGEMENT/NETWORK.GatewayAddress
æ pr /MANAGEMENT/NETWORK.GatewayAddress=192.168.0.1
7.14.8. Change the Gateway Address (Static)
Command and Response
ç
æ
Example
ç SET /MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
æ pw /MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
ç CALL /MANAGEMENT/NETWORK:ApplySettings()
æ mO /MANAGEMENT/NETWORK:ApplySettings
INFO:

Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
SET·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
pw·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
The applySettings method will save and apply the new value and results the device to reboot.
pr·/MANAGEMENT/NETWORK.GatewayAddress=<gw_address>
SET·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_add>
pw·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_add>
The applySettings method will save and apply the new value and results the device to reboot.
87