Firmware Release Notes - Lightware RAP-B511-EU User Manual

   
10. Appendix
10.6. Firmware Release Notes
Below list shows the released firmware packages with important
notes.
v1.1.0b3b3
Release date: 2021-01-12
New feature:
▪ Added AND operator for Event Manager Conditions (Advanced
Control pack v3)
▪ Added Condition triggering for Event Manager (Advanced Control
pack v3)
▪ Added Variable handling for Event Manager (Advanced Control
pack v3)
▪ Added Permanent TCP clients with configurable target IP
address, and Message recognizer for TCP clients (Advanced
Control pack v3)
▪ Added LW3 command-salvo over Http POST (protocol.lw3)
(Advanced Control pack v3)
▪ Added Http message sending with sendHttpPost and
sendHttpPut (target server IP, target filepath, header, body)
(Advanced Control pack v3)
▪ Added method to send Wake On LAN packet (Advanced Control
pack v3)
▪ Added cleartext login function (disabled by default) (Advanced
Control pack v3)
▪ Added MAC filtering (Advanced Control pack v3)
▪ Added IP port and services filtering (Advanced Control pack v3)
▪ Added Macro capability (running partial device preset with tags)
(Advanced Control pack v3)
▪ Added LMDMP (Lightware Multicast Device Management
Protocol) feature.
▪ Modified DeviceLabel
LW_<productname>_<serialnum>
▪ Added properties in root node: FirmwareVersion, PackageVersion,
MacAddress.
▪ Added property to indicate FeaturePackVersion (Advanced
Control pack v3)
▪ Added Condition detect on property change to anything in Event
Manager (Advanced Control pack v3)
▪ Added Network HostName property (default: lightware-
<serialnum>).
▪ Support for the factory reset button on the front panel.
property default text to
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
RAP-B511 series – User's Manual
Bugfix:
▪ Improved network compatibility with 10.x.x.x IP address range.
▪ Minor performance improvements and modifications.
▪ Fixed issue with tick counter when the device is continuously
operating for a very long time.
▪ Unmute on volume change property added.
v1.0.3b2
Release date: 2020-05-21
Bugfix:
▪ Cisco integration support
▪ Minor built-in miniweb bugfixes
v1.0.2b2
Release date: 2019-09-17
Bugfix:
▪ The setting of the device into factory default mode accidentally
while operating the appliance has been ceased. In case of the
device IP is unknown and no factory default hotkey is available,
please connect the device to a computer using an USB cable.
v1.0.1b1
Release date: 2019-05-21
Bugfix:
▪ Fixed a potential Backup restore LED status bug
v1.0.0b17
Release date: 2019-04-17
New feature:
▪ Initial release
Known issue:
▪ If the USB connection is broken accidentally, it occurs that the
device lost the connection. Check the cable and reset the device.
118