Logout From The Device; Enable The Cleartext Login Function; Time Settings; Query The Timezone - Lightware RAP-B511-EU User Manual

   
7. LW3 Programmers' Reference
7.5.3. Logout from the Device
Command and Response
ç CALL·/LOGIN:logout(<password>)
æ mO·/LOGIN:logout
Example
ç CALL /LOGIN:logout(pr0t3ctED)
æ mO /LOGIN:logout
After a successful logout, the LoggedIn property becomes false and the LW3 tree is protected.
7.5.4. Enable the Cleartext Login Function
ATTENTION!
This property can be changed only, if the LoggedIn property is true.
Command and Response
SET·/LOGIN:LoginEnable=<login_state>
ç
pw·/LOGIN.LoginEnable=<login_state>
æ
Parameters
If the <login_state> parameter is true (or 1), the Cleartext login function is enabled, if the parameter is false (or
0), the function is disabled. Please note that the function can be enabled without setting a password by the
setPassword method.
Example
ç SET /LOGIN.LoginEnable=true
æ pw /LOGIN.LoginEnable=true
RAP-B511 series – User's Manual
7.6. Time Settings
7.6.1. Query the Timezone
Command and Response
ç
æ pw·/SYS/MB/TIMEZONE.Timezone
Parameters
<timezone>
Example
ç SET /SYS/MB/TIMEZONE.Timezone=CET-1CEST,M3.5.0/2,M10.5.0/3
æ pw /SYS/MB/TIMEZONE.Timezone=CET-1CEST,M3.5.0/2,M10.5.0/3
TIPS AND TRICKS:

Device Controller software in the
TIPS AND TRICKS:

Enabling Network Time Protocol means, that the RAP-B511 is permitted to get time information from an
NTP server. The device time synchronized repeatedly and automatically.
Command and Response
ç
æ
Parameters
<enable_ntp>
Example
ç SET /SYS/MB/NTP.Enable=true
æ pw /SYS/MB/NTP.Enable=true
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
SET·/SYS/MB/TIMEZONE.Timezone=<timezone>
=<timezone>
Time zone setting in POSIX TZ format.
Timezone and daylight saving settings can be done easily and quickly with Lightware

Time Settings

section.
Enable Network Time Protocol (NTP)
SET·/SYS/MB/NTP.Enable=<enable_ntp>
pw·/SYS/MB/NTP.Enable=<enable_ntp>
true: NTP enabled
false: NTP disabled
71