Lightware RAP-B511-EU User Manual page 37

   
5. Software Control - Lightware Device Controller
Button configuration steps:
Step 1. Choose the tab and click on the desired action or condition in the
thematic list.
Step 2. Type the missing parameters (and the delay, if it is necessary) in
the pop up window (on the right).
Step 3. Click OK to save. The configuration is saved as an Event in
the Event Manager. It can be seen in the event list, numbered
backwards.
Stylize the Buttons
When the button has a function, the last step is to add a text or icon to the wireframe view. This layout will
appear on the Built-in Miniweb and supports the identification of the virtual buttons with the front panel.
2
3

TIPS AND TRICKS: Using the same appearance of the button with the label on the physical device helps
identify them easily.
Tab of Style config.
1
1
Button icons (same with the
2
device label stickers ). Click
one to set for the currently
selected button.
Selected icon (highlighted
3
4
with amber frame)
Button text entry field.
4
5
Maximum three rows can be
displayed for one button. 30
ASCII characters are allowed
for all rows.
6
Click to clear the button
5
style.
Click to open the Miniweb
6
page in the web browser. For
7
more details, see the
Miniweb section.
This QR code contains the
7
web address of the Miniweb
page. It can be saved in png.
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
RAP-B511 series – User's Manual
Button Interactions
This section provides an overview of all defined events
of the selected button. One line represents one event.
It displays the delay time between the action and the
condition, the condition or the action with the parameters,
the event number, where the current setting is saved.
The icon shows that the event was not created from

the UI config page. It means that an event was set in the
Event Manager, where the interaction state of the selected
button was defined as an action or condition (e.g. /
EVENTS/E3.Condition=/MANAGEMENT/UI/BUTTONS/
BUTTON11.State=true )
Click on the icon to Show advanced expression. It displays

the LW3 path of the event.

TIPS AND TRICKS:
mode is not active, keep the cursor on the event line for
a second, and the whole expression appears in the hint box.
The following settings are available in this section:
▪ The existing events can be edited by clicking on the event line (when it is highlighted with amber).
Modifying the event properties is possible in the pop-up window.
Click on the
▪
▪ All events of the button can be copied to another button. Choose a target button by clicking on the
drop-down menu and select the Copy to option.
All events of the button can be swapped with another button. Choose a target button by clicking on
▪
the drop-down menu and select the Swap with option.
▪ Clear All button is for deleting all events of the selected button.
Built-in
If the Show advanced expression
icon beside the event to delete it.

37