Clear One Or More Event(S); Export And Import Events; Settings Menu; Status - Lightware RAP-B511-EU User Manual

   
5. Software Control - Lightware Device Controller
5.6.5. Clear One or More Event(s)
Clear an Event
Press the Clear button in the Event list or in the header section in the Event editor.
Clear all Events
When all the Events must be cleared press the Load factory defaults button above the Event list. You will be
prompted to confirm the process.
WARNING!
Clicking on Load factory defaults button means, the configuration of the buttons are also
deleted, because the conditions and the actions of the buttons are saved as events.
5.6.6. Export and Import Events
The feature allows saving all the Events. The backup file can be uploaded to another RAP-B511 series device.
Export all the Events
Step 1. Press the Export button above the Event list.
Step 2. The Save as dialog box will appear. Set the desired folder and file name, then press the Save button.
The generated file is a simple text file which contains LW3 protocol commands. The file can be viewed by a
simple text editor, e.g. Notepad.

ATTENTION! Editing the file is recommended only for expert users.
Import all the Events
Step 1. Press the Import button above the Event list.
Step 2. The Open dialog box will appear. Select the desired folder and file, then press the Open button.
RAP-B511 series – User's Manual
5.7. Settings Menu
5.7.1. Status
The most important hardware and software related information can be found on this tab: hardware and
firmware version, serial numbers, temperatures, operation time, and voltage information. Device label can
be changed to unique description by the Set button.
Enable Lock buttons disables the whole functionality of the front panel (buttons and the rotary). Blinking of
the button and rotary LEDs three times means, that the front panel functionality is locked. Unlocking is also
possible via LW3 protocol commands (for more details see
For more details about the Miniweb see
#devicelabel #label #producttype
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
Status Tab in Settings Menu
LW3 Programmers' Reference
Built-in Miniweb section.
#firmwareversion #identifyme #status #serialnumber
51
section).