Infra - Lightware RAP-B511-EU User Manual

   
5. Software Control - Lightware Device Controller
5.5.4. Infra
Infra-Red (IR) receiver options can be found on this tab. There are three submenus are available under it:
IR codes, Ports, and Clear all IR codes.
IR Codes
The user can set the name of the IR code, the fingerprint (hash), and the repeat timeout in ms, actions can
be ordered to each IR code as well.
Description Function
ID Code number.
Name You can give an unique name for the desired code.
Fingerprint (hash) Fingerprint code in pronto hexa format.
Detected Indicator gives feedback about the given IR code is detected currently.
Repeat timeout (ms) You can set a timeout to avoid the involuntary code recurrence.
Save: saving the fingerprint and/or the name of the IR code.
Actions Cancel: canceling the fingerprint.
Learn: storing the fingerprint of the detected IR code.
Detected IR
The IR fingerprints are displayed in the box that can be emptied by the Clear button.
fingerprints
IR Codes Window in the Control Menu
Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5
RAP-B511 series – User's Manual
20 fingerprints can be stored in the device at the same time. Each of them can be ordered to an action in
Event Manager.
Learning IR Codes
Step 1. Click on the Learn button.
Step 2. Turn the remote controller to the IR detector. A pop-up window appears in LDC - press your remote
button to learn.
Step 3. Once the code is received, a new window pops up in LDC - learning completed. Click OK to continue.
Step 4. Optionally type a unique name for the code in the Name text box. The default name is code#, e.g.
code0.
Clear all IR codes
Clicking on the button results deleting all stored IR fingerprints.
Ports Tab
User can set the name and command injection port to each sources and destinations. For more details
about IR interface see the Infra Interface section.
Infra Tab - Ports Window
43