Querying The Name Of An Input; Querying The Name Of An Output; Reloading The Default Preset Names; Reloading The Default Input Names - Lightware MX-FR9 User Manual

   
7. Programmer's Reference
7.4.22. Querying the Name of an Input
Command and Response
ȩ {INAME#<in>=?}
Ȩ (INAME#<in>=<Input_name>)CrLf
Example
ȩ {iname#1=?}
Ȩ (INAME#1=PC_1)CrLf
Name for Input 1 is 'PC_1'.
7.4.23. Querying the Name of an Output
Command and Response
ȩ {ONAME#<out>=?}
Ȩ (ONAME#<out>=<output_name>)CrLf
Example
ȩ {oname#2=?}
Ȩ (ONAME#2=Monitor_2)CrLf
Name for Output 1 is 'Monitor_2'.
7.4.24. Reloading the Default Preset Names
ATTENTION!
The <id> field is not relevant here, it only needs to be a valid one. The command will affect
ALL presets, disregarding the actual number that was in the command.
Command and Response
ȩ {PNAME#<id>=!}
Ȩ (PNAME#<id>=Preset•<id>)CrLf
Example
ȩ {pname#2=!}
Ȩ (PNAME#2=Preset 2)CrLf
All preset names are set to default: 'Preset 1', 'Preset 2', and so on.
MX-FR Series Modular Matrix Frames – User's Manual
7.4.25. Reloading the Default Input Names

ATTENTION!
ALL inputs, disregarding the actual number that was in the command.
Command and Response
ȩ {INAME#<id>=!}
Ȩ (INAME#<id>=Input•<id>)CrLf
Example
ȩ {iname#4=!}
Ȩ (INAME#4=Input 4)CrLf
All input names are set to default: 'Input 1', 'Input 2', and so on.
7.4.26. Reloading the Default Output Names
ATTENTION!

ALL outputs, disregarding the actual number that was in the command.
Command and Response
ȩ {ONAME#<id>=!}
Ȩ (ONAME#<id>=Output•<id>)CrLf
Example
ȩ {oname#3=!}
Ȩ (ONAME#3=Output 3)CrLf
All output names are set to default: 'Output 1', 'Output 2', and so on.
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
The <id> field is not relevant here, it only needs to be a valid one. The command will affect
The <id> field is not relevant here, it only needs to be a valid one. The command will affect
106