Querying The Cpu Firmware Compile Time; Querying The Crosspoint Size; Querying The Number Of The Allowed I/O Slots; Querying The Installed I/O Boards - Lightware MX-FR9 User Manual

   
7. Programmer's Reference
7.6.4. Querying the CPU Firmware Compile Time
Command and Response
ȩ {CT}
Ȩ (Compiled:<DATE>•<TIME>•Build:<tag>)CrLf
Parameters
Identifier
<DATE>
<TIME>
<tag>
Example
ȩ {ct}
Ȩ (Compiled:May 10 2012 16:36:35 Build:3564)CrLf
7.6.5. Querying the Crosspoint Size
The response shows the physical crosspoint size.
Command and Response
ȩ {GETSIZE}
Ȩ (SIZE=<size>)CrLf
Parameters
<size> parameter can be 17x17, 33x33 or 80x80.
Example
ȩ {getsize}
Ȩ (SIZE=17x17)CrLf
7.6.6. Querying the Number of the Allowed I/O Slots
Checking the allowed number of I/O boards.
Command and Response
ȩ {MAXSLOTS=?}
Ȩ (MAXSLOTS= IB:<num1>,OB:<num2>)CrLf
Parameters
<num1> and <num2> are two-digit numbers showing the maximum number of allowed input and output
boards correspondingly.
Example
ȩ {maxslots=?}
Ȩ (MAXSLOTS=IB:01,OB:01)CrLf
The router is limited to one input board and one output board (MX-FR9).
Parameter description
Month, day and year
Hours, minutes and seconds
Identification number of the firmware
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
MX-FR Series Modular Matrix Frames – User's Manual
7.6.7. Querying the Installed I/O Boards

DIFFERENCE: This function has been heavily modified in MX-CPU2 compared to CPU1.
Shows the hardware name and revision of the installed cards. The number of responses varies according to
the frame size (number of slots).
Command and Response
ȩ {IS}
Ȩ (SL#•0•<MB_DESC>)CrLf
Ȩ (SL#•1•<OB_DESC>)CrLf
Ȩ (SL#•2•<OB_DESC>)CrLf
...
Ȩ (SL#•51•<IB_DESC>)CrLf
Ȩ (SL#•52•<IB_DESC>)CrLf
...
Ȩ (SL•END)CrLf
Parameters
Slot 0 represents the motherboard. Slots from 1 to 50 are showing the output boards. Slots from 51 to 100
are showing the input boards.
SL# 0
SL# 1-50
SL# 51-100
SL END

INFO: The device responds an 'empty' board descriptor for empty physical slots.
Example
ȩ {is}
Ȩ (SL# 0 MX-DVI-MB80 SCH_1.1 PCB_1.1)CrLf
Ȩ (SL# 1 MX-DVID-OB SCH_2.0 PCB_2.0)CrLf
Ȩ (SL# 2 empty)CrLf
...
Ȩ (SL# 51 MX-DVID-IB SCH_2.0 PCB_2.0)CrLf
The router reports that it has two output and two input slots. There are two input cards and one output card
installed, and one output slot is empty.
Identifier Parameter description
This 'slot' represents the motherboard.
Slots from 1 to 50 are showing the output boards.
Slots from 51 to 100 are showing the input boards.
This message indicates the end of the list.
110