Maximum Cable Lengths (Tps And Tps2 Boards); Maximum Cable Lengths (Tp Boards); Firmware Release Notes - Lightware MX-FR9 User Manual

   
11. Appendix
11.6. Maximum Cable Lengths (TPS and TPS2 Boards)
Pixel Clock Rate
Resolution
1024x768@60Hz
1280x720p@60Hz
1920x1080p@60Hz / 24bpp
1920x1200@60Hz
1600x1200@60Hz
1920x1080@60Hz / 36bpp
3840x2160@30Hz UHD
4096x2160@30Hz 4K
* With Long reach operation mode which supports pixel clock frequencies up to 148.5 MHz.
** When remote powering is used with AWG26 cables, distances are 20% shorter.
To specify the accurate extension distances, please also check the documentation of the connected
HDBaseT-compatible device.
11.7. Maximum Cable Lengths (TP Boards)
Resolution CAT5e UTP CAT5e FTP
640x480@60 60 m
800x600@60 60 m
1024x768@60 55 m
1280x720p60 55 m
1280x1024@60 50 m
1400x1050@60 45 m
1600x1200@60 30 m
1920x1080p60 30 m
1920x1200p60 30 m
Cable Lengths
(Auto / Longreach TPS Mode)
[MHz] CAT5e CAT7
AWG24 AWG26**
65 100 m / 130 m* 90 m / 120 m*
73.8 100 m / 130 m* 90 m / 120 m*
148.5 100 m / 130 m* 90 m / 120 m*
152.9 100 m / NA 90 m / NA
162 100 m / NA 90 m / NA
223.6 70 m / NA 70 m / NA
297 70 m / NA 70 m / NA
297 70 m / NA 70 m / NA
CAT6 CAT6
CAT6 SFTP
UTP FTP
60 m 65 m 70 m 70 m
60 m 65 m 65 m 65 m
55 m 60 m 60 m 60 m
55 m 60 m 60 m 60 m
50 m 55 m 60 m 60 m
45 m 45 m 55 m 55 m
35 m 35 m 45 m 45 m
35 m 35 m 45 m 45 m
35 m 35 m 45 m 45 m
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
MX-FR Series Modular Matrix Frames – User's Manual
11.8. Firmware Release Notes
The list below shows the released firmware packages with important notes.
3.0.0
CAT7
AWG23
Released: 2010-07-14
120 m / 170 m*
New feature
120 m / 170 m*
▪ MX-FR16 support
120 m / 170 m*
▪ MX-FR80 support
120 m / NA
▪ MX-DVID-IB, MX-DVID-OB support
120 m / NA
▪ MX-DVI-TP-IB, MX-DVI-TP-OB support
100 m / NA
▪ MX-DVI-TP-IB+, MX-DVI-TP-OB+ support
100 m / NA
▪ MX-OPT-DVI-OB, MX-OPT-DVI-OB-RCLK support (including SX4A and SX4B optical modules)
100 m / NA
▪ PLL filter is enabled as default in the SI164 chip
▪ Implements a test input and a preview output port on the CPU card
▪ SMPTE alarm function
▪ Advanced EDID management, HDMI support is automatically stripped if needed
▪ LCD menu, control board
▪ Date and time functions
▪ Log errors and basic configuration to the onboard microSD card (FAT filesystem, accessible via
CAT7 SFTP
Lightware protocol).
80 m
▪ Monitoring the voltages, fan speeds and power supplies
75 m
▪ PROTOCOL#2 support
75 m
▪ Standby mode
70 m
3.0.1
65 m
Released: 2010-09-16
60 m
New feature
50 m
▪ MX-FR32R support
50 m
▪ Extended reliability, watchdog + task autorestart
50 m
▪ MX-HDMI-IB, MX-HDMI-OB support (including audio support)
▪ MX-DVI-HDCP-IB, MX-DVI-HDCP-OB support
▪ MX-OPT-DVI-IB support
▪ MX-DVIDL-IB, MX-DVIDL-OB support
▪ HDCP is supported by crosspoint level (HDCP protected signal is routed only to compatible output
boards, so mixed cards are supported).
176