Table of Contents
Advertisement
Park Brake Handle Assembly
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key.
2. Disconnect the battery terminals.
3. Release the parking brake (park brake handle down).
4. Remove the left side console.
5. Remove the locking cotter pin securing the upper brake linkage to the park brake lever (Figure 30).
NOTE: To completely remove the upper brake linkage, remove the locking cotter pin from the brake shaft
and remove the clevis pin. The linkage can now be removed from the frame slot for inspection,
adjustment, or replacement.
6. Remove the bolt and flange nut from the park brake lever assembly (Figure 30).
CHASSIS
C
A
Figure 30
A. Locking Cotter Pin
B. Bolt
See "Console Removal," chapter 5, page 5-8.
Digital Edition - TITAN® HD Service Manual
January 2018
B
C. Flange Nut
5-27
Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
