Toro TITAN HD Service Manual page 38

MAINTENANCE
Servicing the Kohler Engine (Cont.)
Servicing the Air Cleaner (Cont.)
3. Remove the pre-cleaner and paper element.
4. Remove the element, and gently tap the element to dislodge dirt.
NOTE: Do NOT wash the paper element or use pressurized air, as this will damage the element.
NOTE: Replace a dirty, bent, or damaged element. Handle the new element carefully, do not use if the
sealing surfaces are bent or damaged.
5. Wash the foam element in warm water with detergent, rinse, and air dry.
6. Lightly oil the foam element with new engine oil and squeeze out excess oil.
7. Clean the air cleaner base as required, and check for damage.
8. Install the pre-cleaner over the paper element.
9. Install the pre-cleaner and paper element onto the air cleaner base.
10. Install the cover, and secure it with the latches.
3-20 Digital Edition - TITAN® HD Service Manual
Table of Contents January 2018