Toro TITAN HD Service Manual page 64

Changing the Blades (Side Discharge Mower Deck)
Removal
Replace the blade if it hits an object, if the blade is out of balance, or if the blade is bent. To ensure optimum
performance and continued safety conformance of the machine, use genuine Toro replacement blades.
Replacement blades made by other manufacturers may result in non-conformance with safety standards.
1. Hold the spindle shaft with a wrench.
2. Remove the blade bolt, curved washer, and blade from the spindle shaft (Figure 35).
Installation
1. Install blade onto the spindle shaft (Figure 35).
NOTE: The curved part of the blade must point upward.
2. Install the curved washer and blade bolt.
NOTE: Install the curved washer cone toward the bolt head.
3. Torque the blade bolt to 95 ± 5 ft-lbs (122-136 Nm).
3-46
Table of Contents
MAINTENANCE
A
B C
D
Figure 35
A. Sail Area of the Blade
B. Blade
C. Curved Washer
Digital Edition - TITAN® HD Service Manual
January 2018
E
D. Blade Bolt
E. Spindle Shaft