CHASSIS
Motion Control Assembly
Installation (Cont.)
4. Adjust the nut on the motion control assembly until the motion control nut (A) is centered in the control plate
slots (Figure 42).
A
Figure 42
A. Motion Control Nut
5. Connect the motion control damper to the motion control assembly and torque the bolt to 90 ± 10 in-lbs. (108-
135 Nm).
6. Connect the motion control handle to the motion control assembly.
7. Adjust the neutral setting
see "Neutral Adjustment," chapter 7, page 7-4.
8. Lower the unit and verify proper function.
see "Tracking Adjustment," chapter 7, page 7-7.
9. Adjust the tracking if necessary
5-36
Digital Edition - TITAN® HD Service Manual
Table of Contents
January 2018