Electric PTO Clutch
Installation
1. Install the clutch onto the crankshaft ensuring that the slot in the clutch aligns with the tab on the clutch anchor
(Figure 20).
2. Install the two spring washers and clutch bolt (Figure 21).
3. Torque the clutch bolt to 55 ± 6 ft-lbs. (66-83 Nm).
4. Connect the clutch power wire to the clutch.
8-24
Table of Contents
MOWER DECK
Figure 20
Figure 21
A. Clutch
B. Spacer
Digital Edition - TITAN® HD Service Manual
January 2018
C. Spring Washers
D. Clutch Bolt