Toro TITAN HD Service Manual page 122

ENGINE
Toro Twin Cylinder Engine
Installation (Cont.)
19. Connect the chassis wire harness to the main engine wire harness (Figure 12).
Figure 12
20. Connect the fuel supply line to the fuel filter.
21. Install the engine guard.
22. Open the fuel supply valve.
23. Fill the crankcase with approved oil and verify proper oil level.
24. Connect the battery terminals.
25. Verify proper function of the unit.
NOTE: Verify engine speed is set to 3600 ± 50 RPM (or 3000 ± 50 RPM for TE models).
6-9
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents