Table of Contents
Advertisement
HYDROSTATIC DRIVE SYSTEM
Adjusting the Motion Control Linkage (Neutral Setting) (Cont.)
11. Shut off the machine.
12. Remove the jumper wire from the wire harness and plug the connector into the seat switch.
13. Lower the unit.
14. Raise the mower deck and install the height-of-cut pin.
15. Check for proper operation and ensure that the machine does not creep in neutral with the park brake
disengaged.
7-6
Digital Edition - TITAN® HD Service Manual
Table of Contents
January 2018
Hide quick links:
Advertisement
Chapters
Table of Contents
