Table of Contents
Advertisement
Hydrostatic Drive Belt
Removal
1. Stop the engine, wait for all moving parts to stop, and remove the key. Engage the parking brake.
2. Raise and support the unit so that the drive wheels are off the ground.
3. Remove the mower belt from the clutch
4. Using a 9/16 socket on the idler pulley, turn the nut clockwise (from the bottom), starting in the 3 O'clock
position to remove tension on the belt (Figure 6).
HYDROSTATIC DRIVE SYSTEM
see "Mower Belt Replacement, chapter 8, page 8-5.
A. Idler Pulley
B. Idler Spring Post
C. Engine Pulley
Digital Edition - TITAN® HD Service Manual
January 2018
Figure 6
D. Pump Drive Belt
E. Right Hydraulic Pump Pulley
F. Left Hydraulic Pump Pulley
7-9
Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
