Toro TITAN HD Service Manual page 80

CHASSIS
Left Console
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key. Engage the parking brake.
2. Disconnect the battery cables and remove the battery from the tray.
3. Remove the shoulder bolt (T30) at location (A) at the front of the console (Figure 5).
C
A
B
Figure 5
4. Remove the two bolts (B) on the front of the console (Figure 5).
5. Remove the two screws (T25) from the console bracket (C) on the underside of the console (Figure 5).
NOTE: Removing the drive wheel may allow easier access to the torx screws.
5-8 Digital Edition - TITAN® HD Service Manual
Table of Contents January 2018