Toro TITAN HD Service Manual page 91

Fuel Tank
Installation
1. Position the fuel tank assembly onto the frame with the vent ports toward the rear of the machine.
2. Connect the two vent lines to the fuel tank (A) (Figure 20).
3. Connect the fuel supply line to the fuel tank and route the fuel line in the detents molded into the tank (B)
(Figure 20).
4. Install the fuel tank retainer plate.
5. Install the seat assembly.
6. Install the right and left consoles.
CHASSIS
A
C
Figure 20
A. Vent Hose Assembly
B. Fuel Supply Line
See "Seat Installation," chapter 5, page 5-16.
See "Console Installation," chapter 5, page 5-10.
Digital Edition - TITAN® HD Service Manual
January 2018
B
A
C. Fuel Shut-Off Valve
5-19
Table of Contents