Toro TITAN HD Service Manual page 111

MyRide Replacement (Cont.)
Removal (Cont.)
6. Place shoulder bolt back in upper mount and finger tighten with the lock nut (Figure 45).
7. Attach the seat and sub-frame assembly to the overhead lift using three lift points (Figure 46).
8. Remove the two shoulder bolts securing the trailing arm to the lower ROPS tubes.
9. Using an overhead lift, raise the seat up about 12 in.
10. Disconnect the seat switch.
11. Lift the seat and sub-frame assembly up and away from the machine.
CHASSIS
Figure 45
Figure 46
Digital Edition - TITAN® HD Service Manual
January 2018
5-39
Table of Contents