Hydrostatic Drive Belt
Installation (Cont.)
4. Place the idler spring through the frame slot and onto the idler pulley stud (if previously removed).
NOTE: Ensure proper orientation with the hook openings facing away from the idler pivot.
5. Using a 9/16 socket on the idler pulley, turn the nut clockwise (from the bottom of the machine), starting in the 3
O'clock position to remove tension on the belt (Figure 9).
6. Slip the belt up and onto the idler pulley.
7. Lower the unit.
8. Connect the battery and check for proper operation.
7-12
Table of Contents
HYDROSTATIC DRIVE SYSTEM
A. Idler Pulley
B. Idler Spring Post
C. Engine Pulley
Digital Edition - TITAN® HD Service Manual
January 2018
Figure 9
D. Pump Drive Belt
E. Right Hydraulic Pump Pulley
F. Left Hydraulic Pump Pulley