Toro TITAN HD Service Manual page 110

MyRide Replacement
Removal
1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove the key.
2. Lower the ROPS.
3. Remove the two larger nyloc nuts securing the lower shock mounts to the ROPS. The nyloc nuts can be
accessed from the rear of the machine.
4. Open the cable retainer and remove the two cables routed across the seat base (Figure 44).
5. Remove the shoulder bolt securing the front shock to the upper shock mount.
5-38
Table of Contents
CHASSIS
Figure 44
Digital Edition - TITAN® HD Service Manual
January 2018