Toro TITAN HD Service Manual page 126

ENGINE
Kohler Engine
Removal (Cont.)
10. Disconnect the fuel supply line at the fuel filter (Figure 18).
Figure 18
11. Disconnect the throttle cable see "Throttle Cable Removal," chapter 5, page 5-23.
12. Disconnect the choke cable see "Choke Cable Removal," chapter 5, page 5-25.
13. Disconnect the clutch wire from the clutch.
14. Remove the clutch mounting bolt and washers. Slip the clutch off of the crankshaft.
NOTE: Before removing the clutch, note the orientation of the clutch wire and the clutch.
15. Remove the engine pulley. Save the square key securing the pulley to the crankshaft.
16. Remove the engine mounting bolts.
NOTE: Before removing the engine mounting bolts, note the orientation of the clutch anchor. The clutch
wire can remain attached to the clutch anchor.
17. Lift the engine away from the frame.
6-13
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents