Multiple Networking Protocol Support; Standard Phone Jacks; Dial On Demand; Bandwidth On Demand - D-Link DI-106 Series User Manual

Remote access router with integrated ethernet hub
Hide thumbs Also See for DI-106 Series:
  • Faq (29 pages)
Table of Contents

Advertisement

triggered after the send counter reaches 4. If the Idle Timeout
control is set to zero, the PPP echo mechanism will not be used.

Multiple Networking Protocol Support

The DI-106M is a multi-protocol router. It supports TCP/IP,
Novell IPX, and Transparent Bridging.

Standard Phone Jacks

The router is equipped with two standard phone jacks for
connecting telephones, fax machines, or modems. This allows the
ISDN line to be used for voice calls as well as data calls.

Dial On Demand

The Dial On Demand feature allows a DI-106 or DI-106M to
automatically place a call to a Remote Node whenever there is
traffic coming from any workstation on the LAN (Local Area
Network) to that remote site.

Bandwidth On Demand

Your DI-106 or DI-106M supports bandwidth up to 128 kbps
(kilobits—that is, thousands of bits—per second) over a single
ISDN BRI line. It incorporates PPP/MP (Point-to-Point Protocol/
Multilink Protocol) to bundle two B channels over a BRI line. In
addition, the router dynamically allocates bandwidth between the
two B channels, increasing or decreasing bandwidth as needed to
allow for greater efficiency in data transfer. It supports BAP
(Bandwidth Allocation Protocol) and BACP (Bandwidth Allocation
4
Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di-106wDi-106mDi-106mw

Table of Contents