ReliaGATE 10-12 User manual Rev. 2-1
H
OW TO GET STARTED
To get started with the ReliaGATE 10-12, follow these steps:
1. Read carefully and understand the instructions and warnings contained in this manual.
To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the
instructions and warnings contained in this manual.
For more information see:
Whenever in doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support.
For more information see:
2. Know the ReliaGATE 10-12 and its interfaces.
For more information see:
3. Understand how to login the Administration Console and how to manage the interfaces in
Linux.
For more information see:
4. Install the ReliaGATE 10-12.
For more information see:
5. Supply power to the ReliaGATE 10-12 respecting all safety instructions.
For more information see:
6. Start developing your IoT applications.
The ReliaGATE 10-12 supports the Eurotech Everyware Software Framework (ESF). ESF is a
smart application container that enables remote management of IoT gateways and provides a wide
range of APIs allowing you to write and deploy your own IoT application.
For more information see:
"Safety instructions" on
"How to receive technical assistance" on page 17
"Product overview" on page 23
l
"Technical specifications" on page 25
l
"Interfaces overview" on page 39
l
"Interfaces in detail" on page 45
l
"How to login the Administration Console" on page 69
l
"How to manage interfaces in Linux" on page 71
l
"Mechanical specifications" on page 97
l
"How to install the product" on page 99
l
"Power supply. How to turn ON/OFF and reset the product" on page 105
"Eurotech Everyware IoT" on page 93
l
http://esf.eurotech.com/docs.
l
page 9.
How to get started
3 / 118