Internal Cellular Modem (All Vers. Except: -61, -62); Internal Cellular Modem Specifications (According To Product Versions); Lte - Single Antenna Operation Notes - Eurotech ReliaGATE 10-12-6 Series User Manual

ReliaGATE 10-12 User manual Rev. 2-1
9.2

Internal Cellular Modem (all vers. except: -61, -62)

The ReliaGATE 10-12 supports the following Telit LE910 modem variants, according to product versions
based on the geographic area of usage:
Product version
-63, -65, -65G
-64, -66, -66G
-67, -67G
The antennas connectors are placed on the front side.
For more information see:
9.2.1

Internal Cellular Modem specifications (according to product versions)

9.2.1.1 Product features
Rx Diversity and MIMO DL 2x2
l
LTE FDD Cat.1, 3GPP compliant
l
Built in UDP/TCP/FTP/SMTP stack
l
9.2.1.2 LTE data
Uplink up to 5 Mbps
l
Downlink up to 10 Mbps
l
9.2.1.3 Supported RF bands
TELIT LE910 variant
LE910-NA1 - North America
LE910C1-EU - Europe
LE910C1-AP - Japan
9.2.1.4 TX output power
Class 3 (0.2W, 23 dBm) @ LTE
9.2.2

LTE - single antenna operation notes

Single LTE antenna operation can be supported; however, typically, wireless carriers (Mobile Network
Operators) impose restrictions. Please consult with your carrier before considering single LTE antenna
usage.
For optimum performance of the cellular interface, Eurotech recommends the use of both CELL MAIN and
CELL DIV antenna connectors.
If CELL DIV antenna is not used/connected, Eurotech recommends to disable the diversity function: see
"How to disable/enable the diversity (CELL DIV) function" on
Modem variant
Telit LE910-NA1 - North America
Telit LE910C1-EU - Europe
Telit LE910C1-AP - Japan
"How to manage the Internal Cellular Modem" on
Technology
LTE Cat 1 (NA) 3G Fallback
LTE Cat 1 2G/3G Fallback
LTE Cat 1 (JP)
Technology
LTE Cat 1 3G Fallback
LTE Cat 1 2G/3G Fallback
LTE Cat 1
page 73.
4G bands
B2, B4, B5, B12/B13
B1, B3, B7, B8, B20, B28A
B1, B3, B5, B8, B28
page 74.
9 Interfaces in detail
3G bands 2G bands
B2, B5 -
B1, B3, B8 B3, B8
B1, B5, B8 -
47 / 118