Can 0 And Can; Can 0 And Can 1 Connector Specifications - Eurotech ReliaGATE 10-12-6 Series User Manual

ReliaGATE 10-12 User manual Rev. 2-1
9.6

CAN 0 and CAN 1

The ReliaGATE 10-12 provides 2x CAN (Controller Area Network) ports compliant with the CAN
Specification 2.0, Parts A and B:
CAN 0
l
CAN 1
l
The CAN connectors are available on the front side.
For more information see:
No CAN termination resistors are present internally. If required, they need to be added externally.
Notes about CAN power supply:
The ReliaGATE 10-12 can supply power to the 2 CAN ports: 100mA @ 5V (each port)
l
CAN power can be enabled / disabled by software
l
The interfaces are surge protected.
l
9.6.1

CAN 0 and CAN 1 connector specifications

Connector Layout:
Connector Specifications:
Base strip, Header
l
Gender: Male
l
Type: 8-pin, 3.5 mm pitch
l
Mating Connector Specifications:
Pluggable screw terminal block;
l
Gender: Female
l
Type: 8-pin, 3.5 mm pitch
l
Example:
l
Manufacturer: Phoenix Contact
Part Number: MC 1,5/ 8-STF-3,5 - 1847181
(or equivalent)
"How to manage the CAN ports" on page 76.
Connector Pinout:
Pin # Signal Type
1 CAN 0: H IO
2 CAN 0: L IO
3 CAN 0: 5V 5
4 CAN 0: GND P
5 CAN 1: H IO
6 CAN 1: L IO
7 CAN 1: 5V 5
8 CAN 1: GND P
9 Interfaces in detail
Description
CAN port 0 Positive Data
CAN port 0 Negative Data
CAN node 0
5 V Output power supply
Ground
CAN port 1 Positive Data
CAN port 1 Negative Data
CAN node 1
5 V Output power supply
Ground
59 / 118