How To Replace The Mounting Bracket With The Din Rail Mounting Clip Or Vice Versa; How To Replace The Mounting Bracket With The Din Rail Mounting Clip - Eurotech ReliaGATE 10-12-6 Series User Manual

16 How to install the product
16.2 How to replace the Mounting Bracket with the DIN Rail
Mounting Clip or vice versa
16.2.1

How to replace the Mounting Bracket with the DIN Rail Mounting Clip

To replace the Mounting Bracket with the DIN Rail Mounting Clip on the product, complete the following
steps:
1. Remove the 3 screws that hold the Mounting Bracket in place
2. Remove the Mounting Bracket and the 3 spacers (H = 4mm; Ext. diam. = 14mm; Int. diam. = 7mm)
3. Place the DIN Rail Mounting Clip
4. Tighten the 3 screws removed at step 1 by applying a torque of 0.7 Nm
100 / 118
ReliaGATE 10-12 User manual Rev. 2-1