How To Get Started - Eurotech BoltGATE 20-31 User Manual

Modular iot edge gateway for rolling stock

Hide thumbs

Table of Contents

BoltGATE 20-31 User's manual EN

OW TO GET STARTED

To get started with the BoltGATE 20-31 complete this procedure::

1. Read carefully and understand the instructions and warnings contained in this User's

manual.

To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the

instructions and warnings contained in this manual.

For more information, refer to:

If you have questions about these instructions, refer to: https://www.eurotech.com/en/support.

2. Know the BoltGATE 20-31 and its interfaces.

For more information, refer to:

3. Install the BoltGATE 20-31.

For more information, refer to:

4. Supply power to the BoltGATE 20-31 respecting all safety instructions.

For more information, refer

5. Start developing your IoT applications.

The BoltGATE 20-31 supports the Eurotech Everyware Software Framework (ESF). ESF is a

smart application container that enables remote management of IoT gateways and provides a

wide range of APIs allowing you to write and deploy your own IoT application.

For more information, refer to:

"Product Overview" on page 21

"Technical specifications" on page 24

"Main CPU Module interfaces" on page 41

"Mechanical specifications" on page 84

"Product installation and power supply" on page 81

"Eurotech Everyware IoT" on page 91

http://esf.eurotech.com/docs.

Code: BTGATE-20-31_MAN_EN_1-6

"Safety-related information" on

to:"How to supply power to the system" on page 86

Revision: 1-6 2022.07.28