How To Replace The Din Rail Mounting Clip With The Mounting Bracket - Eurotech ReliaGATE 10-12-6 Series User Manual

ReliaGATE 10-12 User manual Rev. 2-1
16.2.2

How to replace the DIN Rail Mounting Clip with the Mounting Bracket

To replace the DIN Rail Mounting Clip with the Mounting Bracket on the product, complete the following
steps:
1. Remove the 3 screws that hold the DIN Rail Mounting Clip in place
2. Remove the DIN Rail Mounting Clip
3. Place the 3 spacers (H = 4mm; Ext. diam. = 14mm; Int. diam. = 7mm) and the Mounting Bracket
4. Tighten the 3 screws removed at step 1 by applying a torque of 0.7 Nm
16 How to install the product
101 / 118