9 Interfaces in detail
9.11
MicroSD card holder
The MicroSD card holder is integrated in a Combo MicroSD (push-pull) + MicroSIM (pull-lever) cards
holder, placed on the top side of the circuit board in the Service Panel.
The holder allows you to insert a MicroSD card (up to 32 GB) for additional data storage.
9.11.1
How to insert / remove the MicroSD card in the holder
To insert the MicroSD card, complete the following steps:
1. Orient the MicroSD card with the contacts facing the circuit board
2. Push the MicroSD card in the holder
To remove the Micro SD card, pull it out from the holder. Use your little finger or a pair of plastic tweezers
to simplify the operation.
64 / 118
ReliaGATE 10-12 User manual Rev. 2-1