Unpacking - Siemens SINAMICS S120 Device Manual

Removing the shipping and handling indicators prior to commissioning
NOTICE
Property damage caused by transport indicators remaining in the device during operation
If transport indicators are left in the device, property damage due to detachment of
transport indicators or temperature damage can occur during operation.
• Remove the transport indicators before putting the drive into operation.
Use ethyl alcohol to remove any remains of adhesive after removing the shipping and
handling indicators from the control cabinet.
3.3.2.4

Unpacking

The packaging material must be discarded in accordance with the applicable country-specific
guidelines and rules.
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
Mechanical installation
3.3 Installation
53