Cable Routing For Basic Line Modules - Siemens SINAMICS S120 Device Manual

Cabinet modules nema

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Cable routing for Basic Line Modules

For the Basic Line Modules, the customer must carry out the following cabling or connection

Cable routing

PROFIBUS cable or PROFINET cable to the Control Unit

DRIVE-CLiQ connections / signal cables to the Control Unit

Signal cables to the customer terminal block –X55

The "Basic rules for cable routing" and "Preparatory steps" described above must

be observed whenever any cabling or connection work is performed.

Cabinet Modules NEMA

Manual, 04/2014, A5E03586450A

Checklist for cabling or connection work for Basic Line Modules

Electrical installation

4.5 Connections